null googlea482a744b173f0a4.html
Toggle menu
Use Contact Us for Messages and Enquiries

Shop by Category

Camec Cladding

Caravan Aluminium Side and Roof Cladding

Camec has been supplying roll formed aluminium cladding to the RV industry for approximately 30 years. Big Red Caravan Parts works closely with this supplier to provide Caravan Aluminium Cladding for your DIY caravan repair or restoration.

Camec sources its aluminium cladding from Euromax one of the world's leading suppliers which warrants the coatings on its aluminium for 5 years, on a pro-rata basis. Camec warrants the aluminium cladding its supplies from defects however does make any claims or warrants the performance of the product regards;

  • The structural performance of the cladding
  • Its waterproof properties.

The roll formed aluminium side cladding comes in two profiles;

Deep Profile CP10

Shallow Profile  CPSF10

It can be manufactured in a variety of lengths including;.

3.00, 5.50, 6.01, 6.50, 7.00, 7.30, 7.60, 8.00, 9.30, 10.668 - all lengths are in meters (m)

While all these lengths are possible it will depending on which warehouse stock is drawn from as to which lengths are available.  

The 5.50, 7.60 and 10.668 m stock lengths are usually available in Queensland and Western Australia warehouses and all lengths made to order* in Victoria. 

The roll formed aluminium roof and end sheeting comes in three profiles;

  • Flat
  • CP48
  • CPF3
Sheet sizes available include;
.
0.315x1.00 (flat only), 1.22x1.00 (flat only), 2.31x1.22 (7'6"x4'), 2.44x1.22 (8'x4'), 5.00x1.22 (16'x4')(flat only) - all lengths are in metres (m) unless otherwise noted.

While all these sizes are possible it will depend on which warehouse stock is drawn from as to which sizes are available.  

The 2.31x1.22 (7'6"x4') and 2.44x1.22 (8'x4') stock sheets are usually available in Queensland and Western Australia with all sheets made to order* in Victoria.

* made to order items have a 3 weeks lead time for manufacture

 

Back to FAQ & Guides

 

Back to Home